CONTACT

+91-99041-89939

Sluice Gate

1. channel type, used in the middle of the channel, three-way sealing
2. Wall type: used in the inlet and outlet of the wall for opening or closing, four-way seal
3. Adjusting type: for adjusting the size of the water flow
4. Weir type: for adjusting water level.

Sluice Gates / Penstock / Open Channel Gates /MS / STAINLESS STEEL -SS

A Sluice gate, also referred to as a penstock or slide gate, is an integral component for regulating fluid flow and isolating fluids in various settings such as power generation facilities, irrigation schemes, wastewater treatment plants, and process plants. The selection of a Sluice gate that corresponds to its duty is essential to satisfy the design criteria and provide an optimal, cost-effective solution. Modern Sluice gates are engineered to handle a wide range of duties that extend from low seating to high off-seating heads, and they are available in sizes ranging from 150 mm to 2000 mm, with circular, rectangular, or square sections. The operation of the gate can be executed through simple direct actuation by manual handwheel or through complex control systems utilizing electrical, pneumatic, or hydraulic actuation.

MANUAL STAINLESS STEEL WALL-MOUNTED PENSTOCK SLUICE GATE/THIMBLE MOUNT SLUICE GATE

MANUFACTURER

This is a brief description of a manual stainless steel penstock sluice gate valve handwheel wall type penstock valve. It is primarily used in sewage treatment plants, water plants, drainage and irrigation, environmental protection, electricity, channel, and other projects to regulate flow, cut off and control water levels.

The sluice gate valve is highly resistant to corrosion, has excellent sealing performance, long life, and is easy to maintain. There are two types of this valve: channel type, which is used in the middle of the channel and has three-way sealing, and wall type, which is used in…
handwheel wall type penstock valve :

These valves are mainly used in sewage treatment plants, water plants, drainage and irrigation, environmental protection, electricity, channels, and other projects to cut off, regulate flow, and control water levels.    The sluice gate valve is corrosion resistant, has good sealing performance, long life, and easy maintenance.

1. channel type, used in the middle of the channel, three-way sealing
2. Wall type: used in the inlet and outlet of the wall for opening or closing, four-way seal
3. Adjusting type: for adjusting the size of the water flow
4. Weir type: for adjusting water level.

handwheel wall type penstock valve :

This valve are mainly used in sewage treatment plants, water plants, drainage and irrigation, environmental protection, electricity, channel, and other projects to cut off, regulate flow, and control water levels.    The sluice gate valve is corrosion resistant, has good sealing performance, long life, and easy maintenance.

  1. channel type, used in the middle of the channel, three-way sealing

2. Wall type: used in the inlet and outlet of the wall for opening or closing, four-way seal

3. Adjusting type: for adjusting the size of the water flow

  1. Weir type: for adjusting water level.

 

Overview

Port Size DN300-DN1000
Type: Channel type/wall type
Main material: Carbon steel/SS/cast steel/super duplex alloys
Seal material EPDM/NBR/brass/bronze
Medium Water, sewage,seawater,acid media
Temperature: ≤80℃
Working head head pressure≤10m-H2O,back pressre≤2m-H2O
MOQ 1set
Actuator: Manual/electric/pneumatic
Standard Customer requires

 

Specifications
USAGE AREA Directing water flow in Water and Wastewater Treatment Plants
Water Intake Structures
Recovery Facilities
Aquaculture Production Facilities
Industrial Process Water Preparation Plants
HYDROELECTRIC PLANTS and Dams
OPERATION Automatic or Manual
INSTALLATION METHOD Wall Mounted
Concrete Pool
ADVANTAGES Wide size range
Special design according to the opening to be closed
Ease of application and assembly
Ease of operation

 

Similar Products

LETS TALK